博主
258
258
258
258
专辑

第十三节 Hystrix 用法,@HystrixProperty参数说明

亮子 2022-07-06 00:31:07 4582 0 0 0

1、hystrix参数使用方法

通过注解@HystrixCommand的commandProperties去配置,
如下就是hystrix命令超时时间命令执行超时时间,为1000ms和执行是不启用超时

@RestController
public class MovieController {
  @Autowired
  private RestTemplate restTemplate;

  @GetMapping("/movie/{id}")
  @HystrixCommand(commandProperties = {
          @HystrixProperty(name = "execution.isolation.thread.timeoutInMilliseconds", value = "1000"),
          @HystrixProperty(name = "execution.timeout.enabled", value = "false")},fallbackMethod = "findByIdFallback")
  public User findById(@PathVariable Long id) {
    return this.restTemplate.getForObject("http://microservice-provider-user/simple/" + id, User.class);
  }

  /**
   * fallback方法
   * @param id
   * @return
     */
  public User findByIdFallback(Long id) {
    User user = new User();
    user.setId(5L);
    return user;
  }
}

2、hystrix参数如下

@HystrixCommand(fallbackMethod = "str_fal1backMethod",
        groupKey = "strGroupCommand",
        commandKey = "strCommand",
        threadPoolKey = "strThreadPoo1",
        commandProperties = {
                //设置隔离策略,THREAD表示线程地SEMAPHORE:信号池隔离
                @HystrixProperty(name = "execution.isolation.strategy", value = "THREAD"),
                //当隔离策略选择信号池隔离的时候,用来设置信号池的大小(最大并发数)
                @HystrixProperty(name = "execution.isolation.semaphore.maxConcurrentRequests", value = "10"),
                //配置命令执行的超时时间
                @HystrixProperty(name = "execution.isolation.thread.timeoutinMilliseconds", value = "10"),
                //是否启用超时时间
                @HystrixProperty(name = "execution.timeout.enabled", value = "true"),
                //执行超时的时候是否中断
                @HystrixProperty(name = "execution.isolation.thread.interruptOnTimeout", value = "true"),
                //执行被取消的时候是否中断
                @HystrixProperty(name = "execution.isolation.thread.interruptOnCancel", value = "true"),
                //允许回调方法执行的最大并发数
                @HystrixProperty(name = "fallback.isolation.semaphore.maxConcurrentRequests", value = "10"),
                //服务降级是否启用,是否执行回调函数
                @HystrixProperty(name = "fallback.enabled", value = "true"),
                @HystrixProperty(name = "circuitBreaker.enabled", value = "true"),
                //该属性用来没置在滚动时间窗中,断路器熔断的最小请求数。例如,默认该值为20的时候
                //,如果滚动时间窗(默认10秒)内仅收到了19个请求,即使这19个请求都失败了,断路器也不会打开。
                @HystrixProperty(name = "circuitBreaker.requestVolumeThreshold", value = "20"),
                //该属性用来没置在滚动时间窗中,表示在滚动时间窗中,在请求数量超过
                //circuitBreaker.requestVolumeThreshold的情况下,如果错误
                //请求数的百分比超过50,就把断路器设置为“打开”状态,否则就设置为“关闭”状态。
                @HystrixProperty(name = "circuitBreaker.errorThresholdPercentage", value = "50"),
                //该属性用来设置当断路器打开之后的休眠时间窗。休眠时间窗结束之后,
                //会将断路器置为“半开”状态,尝试熔断的请求命令,如果依然失败就将断路器继续设置为“打开”状态,
                //如果成功就没置为"关闭”状态。
                @HystrixProperty(name = "circuitBreaker.sleepWindowinMilliseconds", value = "5000"),
                //断路器强制打开
                @HystrixProperty(name = "circuitBreaker.forceOpen", value = "false"),
                //断路器强制关闭
                @HystrixProperty(name = "circuitBreaker.forceClosed", value = "false"),
                //滚动时间窗设置,该时间用于断路器判断健康度时需要收集信息的持续时间
                @HystrixProperty(name = "metrics.rollingStats.timeinMilliseconds", value = "10000"),
                //该属性用来设置滚动时间窗统计指标信息时划分"桶"的数量,断路器在收集指标信息的时候会根据
                //设置的时间窗长度拆分成多个“桶”来累计各度量值,每个”桶"记录了一段时间内的采集指标。
                //比如10秒内拆分成10个"桶"收集这样,所以 timeinMilliseconds必须能被numBuckets整除。否则会抛异常@HystrixProperty(name = "metrics.rollingStats.numBuckets", value = "10"),
                @HystrixProperty(name = "metrics.rollingStats.numBuckets", value = "10"),
                //该属性用来设置对命令执行的延迟是否使用百分位数来跟踪和计算。如果没置为false,那么所有的概要统计都将返回-1。
                @HystrixProperty(name = "metrics.rollingPercentile.enabled", value = "false"),
                //该属性用来没置百分位统计的滚动窗口的持续时间,单位为毫秒。
                @HystrixProperty(name = "metrics.rollingPercentile.timeInMilliseconds", value = "60000"),
                // 该属性用来没置百分位统计滚动窗口中使用“桶”的数量。
                @HystrixProperty(name = "metrics.rollingPercentile.numBuckets", value = "60000"),
                //该属性用来没置在执行过程中每个“桶”中保留的最大执行次数。如果在添动时间窗内发生超过该设定值的执行次数,
                //就从最初的位置开始重写。例如,将该值设置为100,滚动窗口为10秒,若在10秒内一个“桶”中发生了500次执行,
                //那么该“桶”中只保留最后的100次执行的统计。另外,增加该值的大小将会增加内存量的消耗,并增加排序百分位数所需的计算时间。
                @HystrixProperty(name = "metrics.rollingPercentile.bucketSize", value = "100"),
                //该属性用来设置采集影响断路器状态的健康快照(请求的成功、错误百分比)的间隔等待时间。
                @HystrixProperty(name = "metrics.healthSnapshot.intervalinMilliseconds", value = "500"),
                //是否开启请求缓存
                @HystrixProperty(name = "requestCache.enabled", value = "true"),
                //HystrixCommand的执行和事件是否打印日志到 HystrixRequestLog 中
                @HystrixProperty(name = "requestLog.enabled", value = "true"),},
        threadPoolProperties = {
                //该参数用来设置执行命令线程池的核心线程数,该值也就是命令执行的最大并发量
                @HystrixProperty(name = "coreSize", value = "10"),
                //该参数用来没置线程池的最大队列大小。当设置为-1时,线程池将使用SynchronousQueue实现的队列,
                //否则将使用LinkedBLockingQueue实现的队列。
                @HystrixProperty(name = "maxQueueSize", value = "-1"),
                //该参数用来为队列设置拒绝阈值。通过该参数,即使队列没有达到最大值也能拒绝请求。
                //该参数主要是对LinkedBLockingQueue 队列的补充,因为LinkedBLockingQueue
                //队列不能动态修改它的对象大小,而通过该属性就可以调整拒绝请求的队列大小了。
                @HystrixProperty(name = "queueSizeRejectionThreshold", value = "5")})

参考文章